Drum fertilizer coolers are continuously operating industrial equipment. Inadequate routine maintenance can easily lead to frequent failures, impacting production schedules and shortening equipment lifespan.
First, regularly inspect the transmission system. The bearings and gears in the transmission are highly consumable and should be inspected weekly. Observe the bearings for unusual noises or heat buildup. Excessive temperatures may indicate insufficient lubrication or bearing wear, requiring timely lubrication or bearing replacement.
Second, ensure the cooling system is clean. Prolonged cleaning of the cooling jacket can lead to accumulation of scale and impurities, impairing heat transfer and reducing cooling effectiveness. It is recommended to clean the jacket every three months. If using cold water cooling, circulate a citric acid solution to remove scale. If using cold air cooling, clean the air inlet filter monthly to prevent dust from clogging the filter and reducing air flow.
Third, inspect the sealing components for leaks. Seals at the feed, discharge, and exhaust ports (such as rubber rings and asbestos gaskets) are prone to leakage due to wear and aging. They should be inspected monthly. If dust or cooling medium leakage is detected, the seals should be replaced promptly.
Fourth, regularly clean the drum fertilizer cooler interior. Even with suitable materials, a small amount of material may remain on the drum interior after long-term operation. If not cleaned, this material will gradually accumulate and affect the uniformity of material turnover. It is recommended to use a special scraper to clean any remaining material from the drum fertilizer cooler interior after weekly shutdown.